Equipment Configuration:
Laser marking station, bracket copper bushing pressing station, buffer pad & screw tightening station, CCD visual inspection station,
robot unloading & assembly station, rotating shaft pressing station, motor assembly & testing station, pedal pre-assembly station,
and pedal assembly final inspection station.
Equipment Working Principle:
This equipment completes component assembly of the front bracket, rear bracket and pedal body via multiple assembly stations. After all parts are assembled, a full inspection of the complete pedal assembly is carried out.
| No. | Inspection Item | Inspection Parameter | Remarks |
| 1 | Normal Working Voltage | 9-16V | |
| 2 | Normal Working Current | ≥3A | |
| 3 | Pedal Extension Time | 1.5S-2S | The pedal extends and retracts 2-3 times respectively |
| 4 | Pedal Retraction Time | 1.5S-2S | |
| 5 | Pedal Extension Current | 3A-4A (TBD, subject to actual product calibration) | |
| 6 | Pedal Retraction Current | 3A-5A (TBD, subject to actual product calibration) | |
| 7 | Locked Rotor Current | ≤30A | Locked rotor force, measured by force detection sensor |
| 8 | Extension Anti-pinch Force | 100N ±10N | Measured by force detection sensor |
| 9 | Ice-breaking Force | ≥50N.m | Measured by force detection sensor |
| 10 | Noise | <50dB | Collector placed 500mm away from the noise source |
